Driving equipments, mining, metallurgy, printing, paper making, etc
500 Set/Sets per Year
Packaging & Delivery
Export wooden package in individual plywood box, customized as your request.
YR Series HV Wound Rotor Motor (Slip Ring Motor)
220kw - 2500KW
3KV, 6KV, 10KV
Export Wooden Package
30% in advance, balance by T/T or L/C at sight
YR4001-4, 315KW, 6000V, 1480r/min, IC01, IP23, F Insulation
YR4002-4, 355KW, 6000V, 1480r/min, IC01, IP23, F Insulation
YR4003-4, 400KW, 6000V, 1480r/min, IC01, IP23, F Insulation
YR4004-4, 450KW, 6000V, 1480r/min, IC01, IP23, F Insulation
YR4005-4, 500KW, 6000V, 1480r/min, IC01, IP23, F Insulation
YR-series (3kv, 6kv, 10kV) motor, is of wound rotor three phase asynchronous motor. Which complies with JB/T7594-1994 and JB/T10314.1-2002. The protection degree of the motor is of IP23 and the cooling method is of IC01.
The motor has such advantage as high efficiency, energy-saving low noise, low vibration, light weight and reliable performance. They are easy for installation and maintenance.
This motor can generate larger starting torque at the state of relatively lower starting current. It used where the capacity of the feeder line is insufficient to start a squirrel cage motor or where the longer starting time and frequent starting are needed or where adjustment of speed is needed within a limited range such as windlass, press machines, drawing machines.
Type of meaning
The structure and the mounting type is of IMB3 with continuous duty(S1).The rated frequency is 50Hz and the rated voltage is 3000V, 6000V,1000V, other voltage requirement or special requirements should be negotiate with manufacturer before order is placed.
When ordering, the following requirement should be specified:
Frame size such as: YR3551-4
Mounting type: IM B3
Rated Power: 220KW
Protection Degree: IP23
Rated Voltage: 6 KV
Cooling Method: IC01
Rated Frequency: 50HZ
Insulation Class: F
Synchronous Speed: 1500r/min
Ambient Condition: Altitude above sea level maximal 1,000m, cooling air temperature maximal 40℃.
Note: Belt driving is not allowed on the motor of 4poles. Belt driving applied on the motor of other poles, should be negotiated with factory.